IPFire 2.19 Core 106 发布了。 IPFire 是建立在 Linux 源码上的防火墙发行版，并且还带有大量的附加功能。它易于设置和管理。它采用的状态检测防火墙，内容过滤引擎，交通控制质量（ QoS ） ， VPN技术，和大量的记录。 更新内容： Passwords are now saved with a stronger hash (SHA512) which was MD5 before. Please change the root password using the setup tools to store your passwords with the improved hash. Firewall: An incorrect validation of destination IP addresses for rules that use Destination NAT caused that some valid addresses were not accepted. This is fixed now. PPP connections no longer require a password being set (some providers require these being empty) The NTP client now waits correctly for WiFi connections being established before continuing to boot The samba add-on enables SMBv2 by default IPFire now ships the firmware for MediaTek 7601 series devices Various old software components that are not used any more are cleaned up from the systems The iptables page on the web user interface has been improved to be more readable 完整更新内容，点击此处查看。 下载地址： http://downloads.ipfire.org/ IPFire 2.19 Core 106 发布，Linux 防火墙下载地址
